1.5 Ton 16 SEER Goodman Air Conditioner Condenser

OVERVIEW

Goodman has always set its goals at superior comfort at a high efficiency, all the while balancing the unit’s cost. The GSX160181 is no exception, with its durability, reliability, and one of the highest efficiencies available.

QUICK FACTS

• Ideal size to cover a smaller house in ideal climates
• 1.5 ton, 16 SEER AC-only condenser
• Fully charged for up to 15’ of line set
• Low sound output
• Factory-installed filter drier

1.5 ton

The GSX160181 AC-only condenser is 1.5 tons, normally enough to cover up to a smaller house. Please note that in some cases, the system bundle pairs this unit with a larger tonnage coil to maintain the system’s efficiency.

16 SEER

The GSX160181 condenser is designed to be up to 16 SEER in ideal system configurations. Considered a high-efficiency, 16 SEER is around 12% more efficient than a 14 SEER system, saving you a lot of money in energy bills. 16 SEER efficiency ratings tend to be where cost meets efficiency, and is normally the best value for the efficiency.

The GSX160181 condenser comes with Goodman’s standard 10 year parts warranty with online registration through the manufacturer. An installation that follows your state and local codes is required for the warranty to be upheld.

The cabinet of Goodman’s condensers are manufactured out of heavy-gauge galvanized-steel with a baked-on painted finish that is approved for 500 hours of salt spray. The durable cabinet of the GSX160181 is also compliant with 2010 Florida building code integrity requirements for hurricane-strength weather.

For easier maintenance, Goodman designed the GSX160181’s cabinet with two maintenance access panels: one on the top and one on the side. For easier installation, the GSX160181 is made with easy-access gauge ports and service valves with sweat connections. Both of these lower installation and maintenance times and costs, keeping money in your pocket for the things you care about most.

Superior comfort has always been the primary goal for Goodman. The GSX160181 follows this goal, made with high-quality parts and even designed to have one of the lowest sound outputs on the market, thanks to superior sound-dampening and insulation technology. All of this makes you comfortable and lowers your bills while staying in-budget.

3 to 3.5 Ton 24.5" Width Goodman Vertical Evaporator Cased Coil

OVERVIEW

With the CAPF3743D6 evaporator coil, Goodman provides an enhanced comfort to your home. With its ability to work with AC-only systems or with heat pumps and its ability to be installed in both the upflow or downflow orientations, the CAPF3743D6 is designed to be versatile in design and to provide an efficient comfort at a low cost.

QUICK FACTS

• 3 to 3.5 ton evaporator coil
• Installable in the upflow or downflow configurations
• Usable with either a heat pump or an AC-only condenser
• Low air leakage
• Check flowrater expansion device for use in any application

3 to 3.5 Tons

The Goodman CAPF3743D6 evaporator coil is rated for a 3 to 3.5 ton output. In many system configurations, this coil may be larger in tonnage than its paired condenser. This is intentional, to maintain the overall efficiency of the entire system.
Please note that in order for this coil to function, a furnace or blower and a condenser is required, all sold separately.

Warranty

The CAPF3743D6 coil is covered under Goodman’s standard 10 year parts warranty when the unit is installed following your state and local codes, the coil is paired with a compatible condenser, and the entire system is registered online through the manufacturer.

The Goodman CAPF3743D6 evaporator coil is able to be installed in upflow and downflow applications. With its rust-resistant, thermoplastic drain plan, water retention rate is significantly lower than previous models. For even more enhanced durability, the cabinet is made of a strong galvanized-steel with a leather-grain finish. If you ever need to perform maintenance on your coil, there is a split-seam on the front of the casing for easy internal access.
Please note that this coil will not work as a replacement for any single-piece air handler coils.

The CAPF3743D6 evaporator coil’s foil-faced insulation lowers air leakage, increasing the amount of air flow going into your ductwork, keeping you more comfortable while decreasing the unit’s run time. With compatible equipment, the CAPF3743D6 evaporator coil lives up to Goodman’s enhanced comfort and efficiency standards at a reasonable price.

Goodman 1.5 to 2.5 Ton Fixed TXV Kit - R-410A

Thermostatic Expansion Valves (TXVs) are:

• A requirement for 14 SEER or higher split system heat pumps
• A requirement for many condensers or heat pump systems that use the new R-410A refrigerant
• An optional upgrade for any other air conditioner or heat pump system

Your system will operate more precisely and with greater efficiency with a TXV. These valves offer more control over how much liquid refrigerant enters the evaporator coil. The valves only allow a precise amount of liquid into the evaporator coil to ensure that all liquid that enters fully evaporates. This prevents too little liquid from entering the evaporator making the system run less efficiently. It also prevents too much liquid from entering the evaporator which can cause excess liquid in the suction line. Thermostatic Expansion Valves can be mounted in any position on the evaporator coil inlet and are reliable, efficient and virtually trouble-free. Select the TXV to correspond with the tonnage of your air conditioner or heat pump, as well as to match the type of refrigerant your systems uses, R-22 (standard) or R-410A (new alternative). 

When using a TXV, manufacturer's recommend also installing a hard-start capacitor in your heat pump or condenser. This capacitor gives an extra "jolt" of electricity upon startup to push the refrigerant against higher head pressures that are present with a TXV system. If a hard-start capacitor isn't installed, the equipment compressor may sometimes have difficulty starting.

30 Feet of 3/8" LL x 3/4" SL x 3/8" Insulated Line Set

Line sets are the copper lines which connect an outdoor condensing unit/heat pump to an inside air handler or evaporator coil. Line sets are available in different lengths and diameters to fit most applications.

50 Feet of 3/8" LL x 3/4" SL x 3/8" Insulated Line Set

Line sets are the copper lines which connect an outdoor condensing unit/heat pump to an inside air handler or evaporator coil. Linesets are available in different lengths and diameters to fit most applications.