42,000 BTU 19.7 SEER Mitsubishi Five Zone Heat Pump System 6+9+9+9+9
Model: MXZ-5C42NA2 / MSZ-FH06 / 4-MSZ-FH09

Price as configured: $6,308.25

42,000 BTU 19.7 SEER Mitsubishi Five Zone Heat Pump System 6+9+9+9+9

By: Mitsubishi Model: MXZ-5C42NA2 / MSZ-FH06 / 4-MSZ-FH09 ID: 7975

More Views

Price as configured: $6,308.25

Bread Checkout
 
FREE SHIPPING
Mitsubishi
Authorized Mitsubishi Dealer
Ships in 2-3 Weeks
New

* Required Fields

Price as configured: $6,308.25

Accessories

Description

Details

The Mitsubishi Five Zone Mini Split Systems are state of the art ductless mini split heat pump systems, providing both heating and cooling for your home. Rated at 19 SEER, with an inverter-driven compressor, this efficient system will keep operating costs down while providing year-round comfort. Each living space has its own air-handling unit and each unit has its own wireless electronic temperature controller.

Indoor Units

The Mitsubishi Series MSZ-FH mini-split wall mounted air handlers are a perfect fit for your home. With multiple operating modes, multiple fan speeds, and multiple airflow directions, this unit fits the needs of nearly any room.

The MSZ-FH's i-see Sensor 3D monitors the floor and ceiling of its zone for fluctuations in temperature. If it detects an underserved area and will temporarily adjust airflow to ensure complete comfort throughout the zone. This sensor also serves as an occupancy detector, allowing the indoor unit to enter energy saving mode if no human heat signatures are detected within the zone.

The MSZ-FH series uses two advanced filters to clean and deodorize the air that passes through it. The deodorizing filter utilizes a ceramic surface element and platinum nanoparticles to absorb any offending smells. The second filter is an enzyme-based anti-allergy filter that captures and destroys bacteria and particulates.

Mitsubishi's hot start technology prevents cold drafts by delaying fan operation until the heat exchanger has warmed up.

The powerful setting on the Mitsubishi MSZ-FH series makes it easy to get your zone to the perfect temperature quickly. When it is activated, the unit temporarily increases refrigerant flow and fan speed to provide quick comfort through rapid heating or cooling.

By slowly adjusting the cooling set point and swinging the horizontal vanes, the MSZFH06NA can improve the efficiency of cooling operations without compromising the comfort provided.

When the indoor unit is run in dry mode, the coil's temperature stays just below the dew point of the return air, removing unwanted moisture. This improves your comfort and reduces the chance of mold growth and other property damage in the conditioned space.

Optimal air flow is easy to achieve with the MSZFH06NA thanks to two vane control options, standard and wide. These functions provide access to five different horizontal vane positions, six different vertical vane positions, two swing modes, a horizontal vane auto mode, and a vertical vane wide mode. Auto mode selects the best vane position based on operating mode and the swing modes cycle through all positions for maximum coverage. When wide mode is activated, fan speed increases beyond the current setting.

Outdoor Unit

The Mitsubishi Ductless Mini Split MXZ Series Heat Pump and Air Conditioner Condenser has an INVERTER-driven compressor pump that cools or warms refrigerant and sends it inside to an air handler through small pipes. Each living space has its own air-handling unit and each unit has its own wireless electronic temperature controller.

With the Mitsubishi Ductless Mini Split MXZ Series Heat Pump Air Conditioner Multi zone condenser each room or zone operates independently with its own wireless or wired remote controller so people in different rooms can choose the temperature that makes them most comfortable. This unit will work with a variety of indoor unit combinations; with indoor options such as Wall mounted ductless, Floor mounted ductless, Ceiling recessed cassette ductless, horizontal ducted ductless or even multi position ducted air handlers.

Click for more Mitsubishi five zone mini split systems

42,000 BTU Ductless Mitsubishi Mini-Split Multi Zone MXZ-C Series - Heat Pump Condenser

OVERVIEW

The Mitsubishi MXZ-5C42NA2-U1 is a heat pump condenser designed to be used in multi zone system setups. As one air handler is needed per room that you are trying to heat and cool, multiple single zone condensers can take up a lot of space in your yard, making a multi zone unit more practical in many applications.

FEATURES

  • 42,000 BTU multi zone heat pump condenser
  • Variable speed Inverter-driven compressor
  • Quiet operation
  • Supports enhanced comfort down to -4°F
42,000 BTU

The Mitsubishi MXZ-5C42NA2-U1 is rated at 42,000 BTU, which generally should be the same or greater than the total BTU count across all air handlers that this unit is paired with. In some instances, a certified pairing will have a higher BTU count total than this condenser’s rating. This is intentional, as the condenser can easily handle more, however anything higher than this rating can potentially lower the speed that the unit can heat and cool, as well as limit the functional outputs of each air handler if they are all running at the same time.
Please note that in order to function, this heat pump condenser must be installed with compatible air handlers, controllers, and other installation equipment, available at an additional cost

Warranty

Mitsubishi offers a 5 year parts and 7 year compressor warranty on all of its products. When the unit is registered online through the manufacturer after an installation that follows your state and local codes, the warranty is upgraded to a 10 year parts and compressor warranty.

Enhanced Comfort

With its variable speed compressor, the MXZ-5C42NA2-U1 can provide more precise adjustments to the covered spaces with the right air handlers. This also slightly improves electrical efficiency by ramping the compressor up and down based on the unit’s air handlers’ needs, as well as providing a more stable temperature output from the connected air handlers to provide superior comfort.

Intelligent Control

For ease of control, many air handlers that are compatible with the MXZ-5C42NA2-U1 can use any Mitsubishi-brand thermostat or adapter. The most convenient to control—the Kumo cloud WiFi adapter, found here—allows each air handler to be accessed from anywhere that you have Internet. Please note that in most applications, you will need one thermostat or adapter per indoor air handler that you want to be able to control with it.

6,000 BTU Wall Mounted Mitsubishi Mini-Split Multi Zone FH Series - Air Handler

Please note that in order to function, this air handler must be installed with a condenser and other installation equipment, available at an additional cost.

  • Able to cover up to a small room in ideal conditions
  • 6,000 BTU wall-mounted air handler with remote
  • Built-in I-SEE sensor to direct airflow more effectively
  • .225 gallon per hour dehumidification rate

The Mitsubishi MSZ-FH06NA air handler is designed to be able to function as a single zone system or with a multi zone system setup. With integrated I-SEE sensor technology, this air handler can constantly read the temperature from multiple directions in the room, allowing it to aim airflow in the direction that it is needed most. This allows your room to maintain a more constant temperature and decreases the unit’s run time.Keeping health in mind, Mitsubishi also factory-installed an enhanced filtration system.

9,000 BTU Wall Mounted Mitsubishi Mini-Split Multi Zone FH Series - Air Handler

Please note that in order to function, this air handler must be installed with a condenser and other installation equipment, available at an additional cost.

  • Able to cover up to a small room in ideal conditions
  • 9,000 BTU wall-mounted air handler with remote
  • Built-in I-SEE sensor to direct airflow more effectively
  • .225 gallon per hour dehumidification rate

The Mitsubishi MSZ-FH09NA air handler is designed to be able to function as a single zone system or with a multi zone system setup. With integrated I-SEE sensor technology, this air handler can constantly read the temperature from multiple directions in the room, allowing it to aim airflow in the direction that it is needed most. This allows your room to maintain a more constant temperature and decreases the unit’s run time. Keeping health in mind, Mitsubishi also factory-installed an enhanced filtration system.

9,000 BTU Wall Mounted Mitsubishi Mini-Split Multi Zone FH Series - Air Handler

Please note that in order to function, this air handler must be installed with a condenser and other installation equipment, available at an additional cost.

  • Able to cover up to a small room in ideal conditions
  • 9,000 BTU wall-mounted air handler with remote
  • Built-in I-SEE sensor to direct airflow more effectively
  • .225 gallon per hour dehumidification rate

The Mitsubishi MSZ-FH09NA air handler is designed to be able to function as a single zone system or with a multi zone system setup. With integrated I-SEE sensor technology, this air handler can constantly read the temperature from multiple directions in the room, allowing it to aim airflow in the direction that it is needed most. This allows your room to maintain a more constant temperature and decreases the unit’s run time. Keeping health in mind, Mitsubishi also factory-installed an enhanced filtration system.

9,000 BTU Wall Mounted Mitsubishi Mini-Split Multi Zone FH Series - Air Handler

Please note that in order to function, this air handler must be installed with a condenser and other installation equipment, available at an additional cost.

  • Able to cover up to a small room in ideal conditions
  • 9,000 BTU wall-mounted air handler with remote
  • Built-in I-SEE sensor to direct airflow more effectively
  • .225 gallon per hour dehumidification rate

The Mitsubishi MSZ-FH09NA air handler is designed to be able to function as a single zone system or with a multi zone system setup. With integrated I-SEE sensor technology, this air handler can constantly read the temperature from multiple directions in the room, allowing it to aim airflow in the direction that it is needed most. This allows your room to maintain a more constant temperature and decreases the unit’s run time. Keeping health in mind, Mitsubishi also factory-installed an enhanced filtration system.

9,000 BTU Wall Mounted Mitsubishi Mini-Split Multi Zone FH Series - Air Handler

Please note that in order to function, this air handler must be installed with a condenser and other installation equipment, available at an additional cost.

  • Able to cover up to a small room in ideal conditions
  • 9,000 BTU wall-mounted air handler with remote
  • Built-in I-SEE sensor to direct airflow more effectively
  • .225 gallon per hour dehumidification rate

The Mitsubishi MSZ-FH09NA air handler is designed to be able to function as a single zone system or with a multi zone system setup. With integrated I-SEE sensor technology, this air handler can constantly read the temperature from multiple directions in the room, allowing it to aim airflow in the direction that it is needed most. This allows your room to maintain a more constant temperature and decreases the unit’s run time. Keeping health in mind, Mitsubishi also factory-installed an enhanced filtration system.

Specifications

42,000 BTU Ductless Mitsubishi Mini-Split Multi Zone MXZ-C Series - Heat Pump Condenser

skuMXZ-5C42NA2
manufacturerMitsubishi
ahri201754913, 201754914, 201755021
features_1Heat Pump
features_2Maximum Line Set Length: 82'
features_3Maximum System Line Length: 262'
hspf10.3
cooling_btu40,500
heating_btu45,000
decibel56-58
refrigerantR410A
refrigerant_chargePre-Charged For: 98'
seer19
eer9.2
liquid_line1/4" (5)
suction_line1/2" (1), 3/8" (4)
electrical208/230V 1 Phase 60 Hz
electric_phaseSingle Phase
max_breaker_size40
min_breaker_size32.5
nominal_capacity3.5 Ton
min_out_temp_heat5°-65°
min_out_temp_cool14°-115°
zone_compatibilityMulti Zone
operating_modeCooling, Heating
height41-9/32"
width37-13/32"
depth13"
weight189.0000
warranty10 Years with Online Registration
resources You will need Adobe® Acrobat® Reader to view PDF documents.
safety_informationPROPOSITION 65 WARNING


6,000 BTU Wall Mounted Mitsubishi Mini-Split Multi Zone FH Series - Air Handler

skuMSZ-FH06NA
manufacturerMitsubishi
controllerWireless Included
features_1Drain: 5/8"
cooling_btu6,000
heating_btu8,700
cfm117-437 CFM
decibel20-42
refrigerantR410A
capacityDehumidification Rate: 0.23 gal/hr
liquid_line1/4"
suction_line3/8"
electrical208/230V 1 Phase 60 Hz
electric_phaseSingle Phase
nominal_capacity0.5 Ton
mini_split_typeWall Mounted
zone_compatibilityMulti Zone
operating_modeCooling, Heating
height12-11/16"
width36-7/16"
depth9-13/16"
weight29.0000
warranty10 Years with Online Registration
resources You will need Adobe® Acrobat® Reader to view PDF documents.
safety_informationPROPOSITION 65 WARNING


9,000 BTU Wall Mounted Mitsubishi Mini-Split Multi Zone FH Series - Air Handler

skuMSZ-FH09NA
manufacturerMitsubishi
controllerWireless Included
features_1Drain: 5/8"
cooling_btu9,000
heating_btu10,900
cfm117-381 CFM
decibel20-42
refrigerantR410A
capacityDehumidification Rate: 0.23 gal/hr
liquid_line1/4"
suction_line3/8"
electrical208/230V 1 Phase 60 Hz
nominal_capacity0.75 Ton
mini_split_typeWall Mounted
zone_compatibilityMulti Zone
operating_modeCooling, Heating
height12-11/16"
width36-7/16"
depth9-3/16"
weight29.0000
warranty10 Years with Online Registration
resources You will need Adobe® Acrobat® Reader to view PDF documents.
safety_informationPROPOSITION 65 WARNING



Reviews

Reviews

Be the first to review this product

Write Your Own Review

You're reviewing: 42,000 BTU 19.7 SEER Mitsubishi Five Zone Heat Pump System 6+9+9+9+9

How do you rate this product? *

 
1 1 star
2 2 star
3 3 star
4 4 star
5 5 star
Quality
Price
Service

Product Q & A

Product Questions
Ask a Question Ask a Question

Sort By: 

  

 

Why Choose a Mitsubishi Product?

Why Choose Mitsubishi?

Mitsubishi is a global leader and is dedicated to building innovative, energy intelligent heating and cooling systems serving residential, commercial, and industrial applications. Their AC and Heat Pump Mini-Split systems are designed to provide years of comfort for your home while helping you to achieve high energy efficiency standards.

 

Why Buy From Us?

Customer Satisfaction

Our dedicated staff works hard to ensure that all orders are handled quickly and efficiently to ensure that you get what you ordered as quickly as possible.

 

Security

We provide a secure online shopping experience to protect your information. We also provide the option to checkout with PayPal to allow you to use a checkout service you are familiar with.

 

Save Money

Our low price guarantee provides you with confidence and piece of mind, knowing you purchased a quality product at a great price

 

See What Our Customers are Saying

HVACDirect.com is here for you
We're Here for You!
Customer Reviews