4 Ton 13 SEER Goodman Air Conditioner Condenser

OVERVIEW

The Goodman GSX130481 is a cooling-only condenser unit. Providing a 13 SEER efficiency with a single stage, reciprocating compressor, the GSX130481 is an inexpensive condenser to cool your home when paired with an AC coil.

QUICK FACTS

• Ideal size to cover a larger house
• 4 ton, 13 SEER AC-only condenser
• Low sound output
• Fully charged for up to 15’ of line set
• Factory-installed filter drier

4 ton

The GSX130481 condenser is a 4 ton AC only unit. In an ideal climate situation, the GSX130481 can usually cover a larger house. For this unit to function, an indoor air handler or coil is required, and this unit is cooling only with no heating capacity on its own.

13 SEER

The Goodman GSX130481 AC condenser is designed to be 13 SEER. This is the lowest efficiency on the market today, making it an inexpensive option for northern states. Please note that this product is regulated by DOE Efficiency Standards.

Due to state laws for minimum required efficiency, please note that this unit cannot be installed in the following states: Alabama, Arizona, Arkansas, California, Delaware, Florida, Georgia, Kentucky, Louisiana, Maryland, Mississippi, Nevada, New Mexico, North Carolina, Oklahoma, South Carolina, Tennessee, Texas, and Virginia. For condensers that are at least 14 SEER, making them compliant in most of these states, click here. If you have any questions, please contact us.

The GSX130481 condenser comes with Goodman’s standard 10 year parts warranty with online registration through the manufacturer. An installation that follows your state and local codes is required for the warranty to be upheld.

With an enhanced copper tube and aluminum fin coil, the GSX130481 is designed to prevent coil degradation. With the baked-on powder-paint finish, the condenser’s heavy-gauge galvanized-steel cabinet is approved for up to 500 hours of salt-spray. The factory-installed filter dryer lowers general wear-and-tear on the unit. All of these features provide you with a durable, reliable condenser to be used whenever you need to cool your home.

The Goodman GSX130481 AC condenser comes standard with service valves that have sweat connections and easy-access gauge ports, both providing a lower installation difficulty and time to lower installation costs. The outer casing has both a top and a side access to allow for easier maintenance and warranty access when necessary.

The Goodman brand always has its customer’s comfort in mind. The GSX130481 is no exception, with not only using high-quality components but also providing enhanced sound-dampening features that allows the brand to manufacture some of the lowest sound output levels in the industry.

4 Ton Multi-Positional Goodman Air Handler

OVERVIEW

The Goodman ASPT48C14 air handler is designed with an efficient, energy-saving EEM motor and durable cabinet with multiple features that provide an easy installation. With this model, Goodman upholds its goals to bring efficiency and enhanced comfort to a cost-effective solution.

QUICK FACTS

• 4 ton air handler
• Electric heat compatible
• Efficient multi-speed blower
• Multi-positional (upflow, downflow, or horizontal)

4 Tons

The Goodman ASPT48C14 air handler is rated for an output of 4 tons. In many cases, the tonnage of the air handler will be larger than the condenser that it is naturally paired with. This is intentional, and is to maintain the overall efficiency of the unit. While the unit does require a condenser to function as part of a heat pump or air conditioner, heat strips may be installed in the air handler to provide straight electric heating, which can be used as an electric furnace on its own or as a backup heat option for a heat pump setup.

Warranty

The ASPT48C14 comes with Goodman’s standard 10 year parts warranty when registered online through the manufacturer. Please note that in order for the warranty to be upheld, the installation must be compliant to all related local and state codes, as well as the unit must be paired with an approved condenser.

With its heavy-gauge cabinet structure and its all-aluminum evaporator to prevent general wear-and-tear, the Goodman ASPT48C14 air handler is durable in design, making it a reliable solution for your home.

The Goodman ASPT48C14 utilizes SmartFrame technology in its sub-structure. This, along with special mounting features on the cabinet, allows for the unit to be easily installed almost anywhere it fits, as it is multi-positional in that it can be installed in the upflow, downflow, or horizontal orientations. For easier maintenance, there is both a top and a side panel to access vital areas on the air handler.

The ASPT48C14 air handler lives up to Goodman’s comfort expectations with its multi-speed EEM motor, which provides a more precise and efficient temperature control.

15 Kilowatt 51,150 BTU Goodman Heater Coil

This 240 volt heater coil can be added to a Goodman air handler to provide winter-time heating capabilities.

Produces 51,150 BTUs of heat.

Controlled by sequencers for optimum temperature balance. Completely assembled and tested. Built-in overcurrent protection on all units as indicated in electrical data chart (see spec sheet). Multiple branch circuit capability. High temperature limit controls for safe operation. Plug-in wiring harness for easy installation into air handlers. Rust-resistant nickel chromium heat elements.

If you are installing a heater coil in an air handler, line voltage is to be connected directly to the heater coil which will operate both the heater coil and air handler. A separate circuit for the air handler is not needed. 

Depending on the heater coil size being installed, one or two circuits to the heater coil will be necessary (see "PRODUCT SPECIFICATIONS" below for quantity and amperage of circuits required for this heater coil.) At your home's circuit panel, individual 220 volt double-pole circuit breakers are required for each circuit.

Compatible With

• Goodman ARPT Air Handlers - 30,000+ BTU
• Goodman ARUF Air Handlers - 30,000+ BTU
• Goodman ASPT Air Handlers - 36,000+ BTU
• Goodman ASUF Air Handlers - 42,000+ BTU
• Goodman AVPTC Air Handlers - 36,000+ BTU

19 Kilowatt 64,800 BTU Goodman Heater Coil

This 240 volt heater coil can be added to a Goodman air handler to provide winter-time heating capabilities.

Produces 64,800 BTUs of heat.

Controlled by sequencers for optimum temperature balance. Completely assembled and tested. Built-in overcurrent protection on all units as indicated in electrical data chart (see spec sheet). Multiple branch circuit capability. High temperature limit controls for safe operation. Plug-in wiring harness for easy installation into air handlers. Rust-resistant nickel chromium heat elements.

If you are installing a heater coil in an air handler, line voltage is to be connected directly to the heater coil which will operate both the heater coil and air handler. A separate circuit for the air handler is not needed. 

Depending on the heater coil size being installed, one or two circuits to the heater coil will be necessary (see "PRODUCT SPECIFICATIONS" below for quantity and amperage of circuits required for this heater coil.) At your home's circuit panel, individual 220 volt double-pole circuit breakers are required for each circuit.

Compatible With

• Goodman ARPT36C14 Air Handlers
• Goodman ARUF30C14 Air Handlers
• Goodman ARUF36C14 Air Handlers
• Goodman ARUF42C14 Air Handlers
• Goodman ASPT36C14 Air Handlers
• Goodman ASPT42C14 Air Handlers
• Goodman ASPT48C14 Air Handlers
• Goodman ASUF39C14 Air Handlers
• Goodman ASUF49C14 Air Handlers
• Goodman AVPTC36C14 Air Handlers
• Goodman AVPTC48C14 Air Handlers

50 Feet of 3/8" LL x 1 1/8" SL x 3/8" Insulated Line Set

Line sets are the copper lines which connect an outdoor condensing unit/heat pump to an inside air handler or evaporator coil. Line sets are available in different lengths and diameters to fit most applications.