3 Ton 18 SEER Two Stage Goodman Air Conditioner Condenser

OVERVIEW

Built with a superior design, Goodman manufactured the GSXC180361 to be whisper-quiet, to be extremely efficient, and to provide the best comfort possible. The GSXC180361 is considered from the best of the best series of AC condenser that Goodman has to offer, making it a top-quality unit to suit the all of your cooling needs.

QUICK FACTS

• Ideal size to cover a medium-sized house in ideal climates
• 3 ton, 18 SEER AC-only condenser
• Two Stage
• Lowest possible sound output
• Fully charged for up to 15’ of line set
• Factory-installed filter drier

3 ton

The Goodman GSXC180361 air conditioning condenser is rated for 3 tons, which can cover up to a medium-sized house in an ideal climate. In order to maintain the unit’s efficiency, this condenser may be paired with a higher-tonnage coil.

18 SEER

The Goodman GSXC18 condenser series is designed to be the most efficient AC series in Goodman’s lineup. Specifically, the GSXC180361 is 18 SEER, the highest efficiency rating offered by Goodman. This unit will save you the most money when it comes to your energy bills, at a whopping approximate of 25% more efficient than the 14 SEER industry standard minimum.

The GSXC180361 condenser is designed to be one of the quietest and most stable temperature output condensers made by Goodman today. With its two stage Copeland UltraTech scroll compressor, temperature stability is at its peak, allowing the condenser to only use the highest output when needed, and using the lower output more often to prevent overshooting the desired temperature and lowering the amount of time that the fan is at its loudest. Further enhancing comfort, the two stage compressor also allows for a better dehumidification of your home. Moreover, the cabinet is insulated and the compressor has a built-in foam compressor sound blanket, further decreasing the unit’s sound output.

With Goodman’s standard 10 year parts warranty, the GSXC180361 provides a peace of mind in the rare occurrence that something goes wrong on your unit. On top of this, Goodman also offers an astounding lifetime warranty on the unit’s compressor when it is paired with a new coil or air handler that is a Goodman-certified configuration. All of Goodman’s warranties require a professional installation that follows your state and local codes and an online registration within 60 days of your installation through the manufacturer.

With its durable galvanized-steel cabinet and its painted finish that is approved for 500 hours of salt spray, the GSXC180361 condenser stands up to Goodman’s high durability standards. The durable design of the cabinet also makes it 2010 Florida building code integrity requirements for hurricane-type winds compliant when it is properly anchored.

With its compact footprint and rust-resistant coated screws, the GSXC180361 is designed to be suitable in almost any installation location. For easier installation, Goodman designed the gauge ports and service valves to be easily accessible and with sweat connections. The cabinet has a maintenance access panel on both the top and the side of the unit. All of this allows you to keep money in your pocket and have a lower resolution time if a rare system issue occurs, providing comfort with a peace of mind.

Goodman 2.5 to 3 Ton TXV Kit - R-410A

Goodman's TXV valves are designed to improve the reliability and efficiency of your central split system. With the TX3N4, you can be assured that your two-and-a-half or three ton system is getting the proper refrigerant flow, even through changing conditions. Since this valve is installed externally, it is easy to service and maintain. If you're looking to improve the efficiency and performance of your system, the TX3N4 is a good start.

Product Compatible With

• Goodman GSX130301 Air Conditioners
• Goodman GSX130361 Air Conditioners
• Goodman DSXC160361 Air Conditioners
• Goodman GSZ130301 Heat Pumps
• Goodman GSZ130361 Heat Pumps
• Goodman SSZ140301 Heat Pumps
• Goodman SSZ140361 Heat Pumps
• Goodman SSZ140381 Heat Pumps
• Goodman SSZ160301 Heat Pumps
• Goodman SSZ160361 Heat Pumps
• Goodman DSZC160361 Heat Pumps
• Goodman DSZC180361 Heat Pumps
• Goodman CAPF3030*6 Evaporator Coils
• Goodman CAUF3030*6 Evaporator Coils
• Goodman CAPF3642*6 Evaporator Coils
• Goodman CAUF3642*6 Evaporator Coils
• Goodman CHPF3636B6 Evaporator Coils
• Goodman CSCF3036N6 Evaporator Coils
• Goodman CSCF3642N6 Evaporator Coils

100,000 BTU 80% AFUE Variable Speed Goodman Gas Furnace - Upflow/Horizontal

OVERVIEW

The GMVC81005CN gas furnace is from one of the top-of-the-line series by Goodman. Considered one of the best of the best, this furnace has a two stage burner and a variable speed blower motor. With the best durability and reliability that Goodman 80% efficient furnaces have to offer, we are proud to offer you the Goodman GMVC81005CN gas furnace.

QUICK FACTS

• This furnace is ideal to heat a medium-sized house (in average climate conditions)
• 100,000 BTU 80% AFUE two stage variable speed natural gas furnace
• Requires metal flue venting
• Can be used in the upflow or horizontal orientation
• Can be converted to propane with an LP conversion kit (sold separately)
• Innovative design for electrical efficiency, safety, and lower sound output

100,000 BTU

At an input of 100,000 BTU’s, the GMVC81005CN Goodman gas furnace is suitable for up to a medium-sized house in an average climate. The output of this furnace is 80,000 BTU’s, which is calculated by the input times the 80% efficiency rating.

80% Efficiency Rating

With the industry standard efficiency of 80% AFUE, the GMVC81005CN Goodman gas furnace uses 80% of the fuel going into the furnace to heat your home and the remaining 20% of the fuel going into it is used up in normal furnace operations and is lost out of the flue venting. The GMVC81005CN requires metal flue venting like any 80% efficient furnace, while anything 90% and above would require plastic or PVC venting.

Please note that this furnace does not comply with California Low NOx or Ultra-Low NOx regulations. If you have any questions, please contact us.

The GMVC81005CN is equipped with two stages, allowing for an adjusted heat output to better suit your home’s comfort needs. The integrated variable speed blower on the furnace allows for an exact airflow output based on the requirements for your home as calculated by the control board and thermostat, keeping your home at a more constant temperature and increasing efficiency overall.

The GMVC81005CN comes standard with Goodman’s 10 year parts warranty and its phenomenal lifetime heat exchanger warranty. In order to maintain this warranty, the installation must follow your state and local codes and the unit must be registered online through the manufacturer.

The tubular heat exchanger on the GMVC81005CN is heavy-duty for constant use in the winter. Made of aluminized steel, Goodman heat exchangers provide fast and efficient heat transfer rates, all the while increasing the furnace’s dependability and reliability. The heavy-duty exterior of the unit protects all of the unit’s internal mechanisms and the secure cabinet lowers air leakage and sound output in comparison to its competitors, all providing enhanced comfort that lasts a long time.

The GMVC81005CN furnace runs natively on natural gas. When you use Goodman’s associated LP conversion kit (found here at an additional cost), this furnace can use propane instead when the installation calls for it. This Goodman furnace is also able to be installed in the upflow or horizontal positions, allowing for a broader application potential.

4 to 5 Ton 24.5" Goodman Horizontal Evaporator Cased Coil

OVERVIEW

The Goodman CHPF4860D6 evaporator coil is designed for any installations that the coil needs to sit on its side, in the horizontal position. With its enhanced comfort and superior efficiency design, the CHPF4860D6 is an inexpensive yet quality choice for you.

QUICK FACTS

• 4 to 5 ton evaporator coil
• Installable in the horizontal configuration
• Usable with either a heat pump or an AC-only condenser
• Works with R410A or R22 refrigerant
• Low air leakage
• Check flowrater expansion device for use in any application

4 to 5 Tons

At an output of 4 to 5 tons, the Goodman CHPF4860D6 evaporator coil is ready for almost any horizontal installation at that size. In many situations, a condenser that is paired with the condenser is going to be smaller than this coil. This is intentional and is to maintain the overall unit’s efficiency.
Please note that for this coil to function, a furnace or blower and a condenser is required, all sold separately. This coil is not designed to replace a coil in a single-piece air handler.

Warranty

The CHPF4860D6 coil is covered under Goodman’s standard 10 year parts warranty when the unit is installed following your state and local codes, the coil is paired with a compatible R410A condenser, and the entire system is registered online through the manufacturer.

The Goodman CHPF4860D6 evaporator coil is designed with a durable outer casing and a rust-resistant drain pan to lower general wear and tear to make sure the coil works for years to come. To ease installation, the unit is designed to be slim and able to fit in many crawl spaces and attics, and with its foil-face insulation making the unit’s air leakage minimal, installation location does not necessarily have to be insulated for normal temperature operations. For maintenance, the coil has a split-seam on the front of it for easier access.

30 Feet of 3/8" LL x 7/8" SL x 3/8" Insulated Line Set

Line sets are the copper lines which connect an outdoor condensing unit/heat pump to an inside air handler or evaporator coil. Line sets are available in different lengths and diameters to fit most applications.

50 Feet of 3/8" LL x 7/8" SL x 3/8" Insulated Line Set

Line sets are the copper lines which connect an outdoor condensing unit/heat pump to an inside air handler or evaporator coil. Line sets are available in different lengths and diameters to fit most applications.