1.5 Ton 16 SEER Goodman Heat Pump

OVERVIEW

At one of the higher efficiencies on the market, the Goodman GSZ160181 heat pump condenser is designed to save you money both up front and in energy bills over time. With its high-quality construction, the GSZ160181 is considered a good all-around choice for many applications.

QUICK FACTS

• Designed to cover a smaller house in average climates
• 1.5 ton, 16 SEER heat pump condenser
• Low sound output
• Fully charged for up to 15’ of line set
• Factory-installed bi-flow filter drier

1.5 ton

The Goodman GSZ160181 heat pump is rated for 1.5 tons, which is normally enough to cover a smaller house in average climates. A heat pump coil or air handler is required for this condenser to function, and some indoor units will be larger in tonnage than this condenser in some bundles to maintain the unit’s overall efficiency.

16 SEER

With its high-end 16 SEER efficiency rating, the GSZ160181 is designed to save you money over the entire life of the unit. 16 SEER units will save you about 12% more in energy bills over a 14 SEER system, making this upgrade a smart upgrade to save you money over time with a small increase in your initial investment in the system.

The GSZ160181 condenser comes with Goodman’s standard 10 year parts warranty with online registration through the manufacturer. An installation that follows your state and local codes is required for the warranty to be upheld.

The cabinet on the GSZ160181 heat pump is designed to be durable in harsh conditions. With its baked-on polyester coat of paint, the unit is approved for up to 500 hours of salt spray. The enhanced durability and paint coat makes the GSZ160181 compliant with 2010 Florida building codes for unit integrity for hurricane-like winds when the unit is properly anchored. For reliability, there is also a built-in bi-flow filter drier that lowers general wear-and-tear on the internals of the unit.

In order to provide a faster and less expensive installation, the Goodman GSZ160181 heat pump is factory-installed with pressure switches, a high-capacity muffler, easily accessible gauge ports, and service valves with sweat connections. The cabinet of the unit is also fitted with dual access panels—one on the side and one on the top—to allow for a much easier maintenance procedure should the need for maintenance arise.

The Goodman company has always promoted enhanced comfort, higher efficiency, and lower cost to all of its units. With SmartShift technology and an enhanced sound insulation structure, the GSZ160181 is whisper-quiet, allowing Goodman to continue to follow its goals in achieving the best comfort levels possible at a low cost.

Goodman 1.5 to 3 Ton 17.5" Wide Variable Speed Modular Blower with Optional Electric Heater

OVERVIEW

The Goodman MBVC1200AA-1 is a variable speed modular blower designed for heating in more compact spaces. Designed to work alone as a straight electric furnace or to work with an AC or heat pump system, the MBVC1200AA-1 is an energy efficient choice that is compatible with ComfortNet communicating technology, all providing an enhanced comfort to your home.

QUICK FACTS

• 1.5 to 3 ton modular blower
• Electric heat compatible, available at an additional cost
• Efficient variable speed blower
• Multi-positional (upflow, downflow, or horizontal)

1.5 to 3 Tons

The Goodman MBVC1200AA-1 modular blower has an output that is rated to match up to a 1.5 to 3 ton system. Although not always the case, in order for a paired air conditioning or heat pump system to function at peak heating and cooling efficiency, ideal system configurations will have the coil within the range of this modular blower. Please note that in order for the modular blower to provide straight electric heating, a compatible electric heat kit is required, available to be field-installed at an additional cost.

Warranty

Goodman offers a 12 year parts warranty on their variable speed modular blowers when your installation that follows your state and local codes. Please note that in order for the warranty to be upheld, you must register the unit online through the manufacturer.

The Goodman MBVC1200AA-1 modular blower is designed to be flexible in installation application. With its small form factor and ability to work with a separate AC or heat pump coil, the unit is easily installable. For durability, there is foil-faced insulation inside the cabinet, and the outer casing is constructed from strong galvanized steel.

The Goodman MBVC1200AA-1 uses a variable speed ECM blower motor, providing precise adjustments to keep your home’s temperature as stable as possible. The unit is also compatible with ComfortNet communicating equipment, and with paired with it, temperature control, efficiency, and overall comfort are enhanced even further. Either way, the MBVC1200AA-1 lives up to the Goodman name.

Goodman 1.5 to 2 Ton TXV Kit - R-410A

Goodman's TXV valves are designed to improve the reliability and efficiency of your central split system. With the TX2N4A, you can be assured that your one-and-a-half or two ton system is getting the proper refrigerant flow, even through changing conditions. Since this valve is installed externally, it is easy to service and maintain. If you're looking to improve the efficiency and performance of your system, the TX2N4A is a good start.

Product Compatible With

• Goodman GSX130181 Air Conditioners
• Goodman GSX130241 Air Conditioners
• Goodman DSXC160241 Air Conditioners
• Goodman GSZ130181 Heat Pumps
• Goodman GSZ130241 Heat Pumps
• Goodman SSZ140181 Heat Pumps
• Goodman SSZ140241 Heat Pumps
• Goodman SSZ160241 Heat Pumps
• Goodman DSZC160241 Heat Pumps
• Goodman CAPF1824*6 Evaporator Coils
• Goodman CAUF1824*6 Evaporator Coils
• Goodman CHPF1824A6 Evaporator Coils
• Goodman CSCF1824N6 Evaporator Coils

3 Ton 17.5" Goodman Horizontal Evaporator Cased Coil

OVERVIEW

The Goodman CHPF3636B6 evaporator coil is designed for any installations that the coil needs to sit on its side, in the horizontal position. With its enhanced comfort and superior efficiency design, the CHPF3636B6 is an inexpensive yet quality choice for you.

QUICK FACTS

• 3 ton evaporator coil
• Installable in the horizontal configuration
• Usable with either a heat pump or an AC-only condenser
• Works with R410A or R22 refrigerant
• Low air leakage
• Check flowrater expansion device for use in any application

3 Tons

At an output of 3 tons, the Goodman CHPF3636B6 evaporator coil is ready for almost any horizontal installation at that size. In many situations, a condenser that is paired with the condenser is going to be smaller than this coil. This is intentional and is to maintain the overall unit’s efficiency.
Please note that for this coil to function, a furnace or blower and a condenser is required, all sold separately. This coil is not designed to replace a coil in a single-piece air handler.

Warranty

The CHPF3636B6 coil is covered under Goodman’s standard 10 year parts warranty when the unit is installed following your state and local codes, the coil is paired with a compatible R410A condenser, and the entire system is registered online through the manufacturer.

The Goodman CHPF3636B6 evaporator coil is designed with a durable outer casing and a rust-resistant drain pan to lower general wear and tear to make sure the coil works for years to come. To ease installation, the unit is designed to be slim and able to fit in many crawl spaces and attics, and with its foil-face insulation making the unit’s air leakage minimal, installation location does not necessarily have to be insulated for normal temperature operations. For maintenance, the coil has a split-seam on the front of it for easier access.

30 Feet of 3/8" LL x 3/4" SL x 3/8" Insulated Line Set

Line sets are the copper lines which connect an outdoor condensing unit/heat pump to an inside air handler or evaporator coil. Line sets are available in different lengths and diameters to fit most applications.

50 Feet of 3/8" LL x 3/4" SL x 3/8" Insulated Line Set

Line sets are the copper lines which connect an outdoor condensing unit/heat pump to an inside air handler or evaporator coil. Linesets are available in different lengths and diameters to fit most applications.