5 Kilowatt 17,000 BTU AirQuest Heater Coil

This 208/230 volt heater coil can be added to a AirQuest air handlers to provide winter-time heating capabilities. Produces 17,000 BTUs of heat.

7 Kilowatt 23,800 BTU AirQuest Heater Coil

This 208/230 volt heater coil can be added to a AirQuest air handlers to provide winter-time heating capabilities. Produces 23,800 BTUs of heat.

1.5 Ton 14 SEER AirQuest by Carrier Heat Pump

OVERVIEW

The AirQuest R4H418GKC manufactured by Carrier is a standard heat pump condenser. Designed with comfort in mind and an inexpensive option for nearly any application, this condenser is considered a good all-around option for almost any application.

QUICK FACTS

• 1.5 ton, 14 SEER heat pump condenser
• Can cool up to a small house in average conditions
• Single stage compressor
• Filter drier included to be field-installed

1.5 Tons

The AirQuest R4H418GKC heat pump condenser has an output of 1.5 tons, generally enough to heat and cool up to a small house in ideal climates. In many system configurations, the tonnage of the unit’s paired coil or air handler will be larger in tonnage than this condenser, which maintains the efficiency of the unit.
Please note that this condenser cannot function on its own, and it needs an indoor coil or air handler to work. This unit will also only heat down to around 35°F, and if you need heat any lower than this, a backup heat strip will be needed to act as straight electric heating in a compatible air handler.

14 SEER

The AirQuest by Carrier R4H418GKC air conditioner condenser is rated at 14 SEER, making it between 5-7% more efficient than standard 13 SEER units, saving you money in electric bills over the entire lifetime of your unit. In general, heat pumps will heat more efficiently than straight electric furnaces.

AirQuest offers a 5 year parts warranty on this condenser. For these warranties to be upheld, the unit must be installed following your state and local codes, a new and certified coil must be installed at the same time, and the entire system must be registered online through the manufacturer.

The cabinet of AirQuest by Carrier units are extremely durable. On the R4H418GKC, there are reinforced corner posts and the internals of the unit are protected by an additional inlet grille, all to provide enhanced protection to the unit.

1.5 Ton Multi-Positional AirQuest Air Handler

OVERVIEW

With its efficient ECM blower motor and factory-installed TXV kit, the AirQuest FEM4X1800BL is a convenient and efficient air handler to provide comfort to your home. If you want superior quality and enhanced comfort, look no further than this model.

QUICK FACTS

• 1.5 ton air handler
• Efficient ECM blower motor
• Multi-positional—can be installed in the upflow, downflow, and horizontal configurations
• Factory-installed TXV kit for enhanced energy optimization
• Compatible with both AC-only and heat pump condensers
• Sturdy, fully insulated cabinet

1.5 Tons

The AirQuest by Carrier FEM4X1800BL air handler is rated for an output of 1.5 tons. In many cases, this air handler will be larger in tonnage than the condenser it is paired with to maintain the unit’s overall efficiency.
Please note that for this unit to provide cooling, an outdoor condenser is required for it to function. The unit can support electric heating as a straight electric furnace or as a backup for a heat pump, offered at an additional cost to be field installed.

Warranty

AirQuest offers a 10 year no hassle replacement warranty, as well as a 10 year parts warranty on this unit. For these warranties to be upheld, the unit must be installed following your state and local codes, a new and certified coil must be installed at the same time, and the entire system must be registered online through the manufacturer. After your purchase, a representative will reach out to you to retrieve installation information so we can register the product for you.

To make a more versatile unit, AirQuest by Carrier designed the FEM4X1800BL to easily be installed in an upflow, downflow, or horizontal position. A TXV kit is already installed on the unit so your installer does not have to install one, decreasing installation costs. For durability, the FEM4X1800BL air handler is designed with an extremely strong, one-piece outer casing to protect the unit, and the coil is designed with corrosion-resistant aluminum.

The FEM4X1800BL air handler has an efficient ECM blower motor, providing a more stable temperature in your home, making you more comfortable. The control board will automatically communicate with your thermostat to adjust the output of the blower to suit your needs. With this intelligent comfort and efficiency, the FEM4X1800BL meets AirQuest’s superior standards to be a part of the Carrier family of units.